Co
nve
n
ien
t func
tions
VQT3C77
72
VIERA Link/Q Link functions
Preparation
1 Connect this unit to your TV or receiver using an HDMI
cable. (
>
14)
2 Set “VIERA Link” to “On” (
>
85). (The default setting is
“On”.)
3 Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
≥
Set the input channel on the VIERA to suit the
terminal to be used as “HDAVI Control”.
4 Turn on all “HDAVI Control” compatible equipment, then
select this unit’s input channel on the connected TV so
that the “HDAVI Control” function works properly.
≥
Also when the connection or settings are changed,
repeat this procedure.
Preparation
Connect this unit to your TV with a fully wired 21-pin Scart
cable (
>
16).
For your reference
The following systems from other manufacturers have
similar functions to Q Link from Panasonic.
For details, refer to your TV’s operating instructions or
consult your dealer.
≥
Q Link (registered trademark of Panasonic)
≥
DATA LOGIC (registered trademark of Metz)
≥
Easy Link (registered trademark of Philips)
≥
Megalogic (registered trademark of Grundig)
≥
SMARTLINK (registered trademark of Sony)
(VIERA]Link)
(Q]Link)
When the following operations are performed, the TV
will automatically switch the input channel and display the
corresponding action. Additionally when the TV is off, the TV
will automatically turn on.
– When play starts on the unit
– When an action that uses DIRECT NAVIGATOR or
FUNCTION MENU etc, is performed
(VIERA]Link)
(Q]Link)
When you set the TV to standby mode, the unit is also
automatically set to standby mode.
≥
Power off link function does not work when recording,
copying etc.
(VIERA]Link)
The following operations make it possible to keep the power
of the unit on and to play music continuously.
When the unit is directly connected to an amplifier/receiver.
1
While playing music
Press [OPTION].
2
Select “TV Power Off”, then press [OK].
≥
Sound may be discontinued for several seconds when the
power to the TV is turned off.
(VIERA]Link)
You can operate this unit with the TV remote control.
Refer to “PAUSE LIVE TV” on page 27.
(VIERA]Link)
(Q]Link)
This function allows you to immediately start recording the
programme that you are viewing on the TV.
Refer to the TV operating instructions for operation.
≥
This unit will record the programmes in DR mode once,
and then automatically convert to the selected recording
mode while this unit is in standby. (
>
28)
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) or receiver under “HDAVI
Control”. You can use this function by connecting the
equipment with the HDMI cable. See the operating
instructions for connected equipment for operational
details.
What is Q Link?
Q Link is a convenient function that offers linked
operations of this unit and a Panasonic TV. You can
use this function by connecting the equipment with a
fully wired 21-pin Scart cable.
Automatic input switching
Power on link
Power off link
Playing music continuously even
after turning off power to the TV
§
1
PAUSE LIVE TV
§
2
Direct TV Recording
§
2
DMRXS400EG-VQT3C77_eng.book 72 ページ ２０１１年５月１６日 月曜日 午前９時３分
