G
etting
sta
rte
d
VQT3C77
15
¾
If the TV does not have the HDMI terminal, connect
the TV with the 21-pin Scart cable or Audio/Video
cable (
>
16)
≥
Supply power from another device when you use 2 or more devices to
receive satellite broadcast, because this unit does not supply power
when it is turned in standby.
About HDMI cable
≥
Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover).
≥
When outputting 1080p signal, please use HDMI Cables
5.0 meters or less.
≥
Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50
(5.0 m), etc.
≥
The HDMI connection supports VIERA Link “HDAVI Control” (
>
72).
However, to perform PAUSE LIVE TV (
>
27) and Direct TV Recording
(
>
30) for programmes that cannot be received by this unit, you need to
connect a 21-pin Scart cable (
>
16).
≥
You cannot connect this unit to DVI devices that are incompatible with
HDCP.
Depending on the device, images may not display properly or at all when
connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
≥
If you are connecting to a TV that is only compatible with 2 channel
audio output, audio with 3 channels or more will be down mixed (
>
108)
and output as 2 channels, even if connecting with an HDMI cable.
(Some discs cannot be down mixed.)
≥
A 21-pin adaptor is required for AUDIO/VIDEO terminal.
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket.
This unit consumes a small amount of power, even when it
is turned off
[approx. 0.2 W (“Power Save in Standby” is activated)]
Connect the Set Top Box or video
equipment
TICAL
L
R
AUDIO
VIDEO
T
AV1
(TV)
VIDEO
RGB/S VIDEO
AV2
(EXT)
VIDEO
RGB/S VIDEO
OUT
AV
This unit’s rear panel
Set Top Box or video equipment
21-pin Scart cable
DMRXS400EG-VQT3C77_eng.book 15 ページ 2011年5月16日 月曜日 午前9時3分