Co
nve
n
ien
t func
tions
VQT3C77
87
¾
Automatic Standby after OTR
If “On” is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing “Automatic Stop” or “Recording Time”
(
>
28).
¾
Automatic Standby after Copy
If “On” is selected, this unit is turned to standby mode
when it is not operated for approximately 5 minutes
after completing copy (
>
50, Copying to HDD with
DIRECT NAVIGATOR, Copying titles with copying list).
∫
Remote Control
Change the remote control code on the main unit and the
remote control if you place other Panasonic products close
together.
≥
Use “DVD 1”, the factory set code, under normal
circumstances.
1
Select the code, then press [OK].
2
While pressing [OK], press and hold the number button
([1] to [6]) for more than 5 seconds.
3
Press and hold [OK] for more than 5 seconds.
4
Press [OK].
≥
Operation is possible only with Panasonic remote controls
with “IR6” printed at the bottom when the remote control
code of this unit is set to “DVD 4”, “DVD 5” or “DVD 6”.
∫
Clock
If the time is not set correctly, use the settings listed in the
method below.
≥
Automatic
This unit usually obtains time and date information from
digital broadcasts.
But, if the time is not set correctly, set it to “Off” and
perform “Manual setting”.
≥
Time Zone
When the time is not correct, set “Time Zone”.
(GMT -6 to + 6)
≥
Manual setting
1
Select “Off” of “Automatic”, then press [OK].
2
Select the item you want to change.
3
Change the setting.
4
Press [OK] when you have finished the settings.
≥
When the clock is set manually, you cannot perform
playing/recording/PAUSE LIVE TV/REWIND LIVE TV of the
programmes that are copy protected (Copying is prohibited). (
>
13)
∫
PIN Entry
You can set/change the PIN. (
>
78)
DVD
IR6
DVD
IR6
IR6
Clock
Time
Date
Time Zone
Automatic
Please set the clock.
OK: access RETURN: leave
OK
RETURN
0
00
10
Automatic
On
1
1
2010
DMRXS400EG-VQT3C77_eng.book 87 ページ 2011年5月16日 月曜日 午前9時3分