T
ro
uble
s
ho
oting
VQT3C77
94
Troubleshooting guide
The remote control doesn’t work.
¾
The remote control and main unit are using different
codes. Change the code on the remote control.
¾
Software (firmware) is updating when “UPD
/
” is
displaying on the unit’s display. Wait until the update is
completed. (
>
89)
¾
The HOLD function is activated. (
>
18)
The unit is on but cannot be operated.
¾
Drive has not been selected properly.
Cannot tune channels.
¾
Check the connections.
Startup is slow.
¾
Startup takes time in the following situations:
– A disc is inserted.
– The clock is not set.
– Immediately after a power failure or the AC mains lead
is connected.
– When the unit is connected with an HDMI cable.
– When the “Power Save in Standby” is activated. (
>
86)
Cannot record.
Cannot copy.
¾
Some broadcasts are copyright protected.
¾
You cannot record to the disc by pressing the [REC
¥
] or
timer recording.
¾
The disc is protected with “DVD Management” or
“Cartridge-protection”. (
>
8, 68)
¾
Some programmes on digital broadcast channels are
copy-restricted and the number of times you can copy in
DR, HG, HX, HE, HL, HM mode is assigned by the
broadcaster.
¾
[DVD-R]
[DVD-RW]
[+R]
[+RW]
Since it will copy to HDD
temporarily, copying is not possible if there is insufficient
available capacity on the HDD.
Delete unnecessary titles on the HDD. (
>
43)
¾
You cannot copy on finalised discs.
¾
[DVD-R] [DVD-RW] [+R] [+RW]
Copying or editing may not be
possible on these discs after ejecting and loading the
disc or turning the unit on/off for approximately 30 times
after being copied to.
¾
Discs recorded on equipment other than this unit may not
be able to be recorded to.
¾
This unit cannot record/copy NTSC signals to discs that
already have PAL signal recordings.
Play of discs recorded with both PAL and NTSC on
another unit is not guaranteed.
Cannot record from external equipment.
¾
Check that the connection and input channel is correct.
(
>
15)
Timer recording does not work properly.
¾
Refer to “Notes on timer recording”. (
>
34)
A part or whole of a recorded title has been
lost.
¾
If there is a power failure or the AC mains lead is
disconnected from the household mains socket while
recording or editing, the title may be lost or the HDD/disc
may become unusable.
We cannot offer any guarantee regarding lost
programmes or discs.
Operation
Press and hold [OK] and the
indicated number button at the
same time for more than
5 seconds. (
>
87)
Unit's display
Recording, timer recording and
copying
DMRXS400EG-VQT3C77_eng.book 94 ページ ２０１１年５月１６日 月曜日 午前９時３分
