G
etting
sta
rte
d
VQT3C77
23
When a single cable router is used, it is necessary to
change the settings of this unit and then run Auto Setup.
1
Press [FUNCTION MENU].
2
Select “Setup” in “Others”, then press
[OK].
3
Select “Antenna System” in “DVB
Tuning”.
4
Press [
2
,
1
] to select “Single Cable”.
5
Press [
3
,
4
] to select “Auto Setup”,
then press [OK].
1
Select “Yes”, then press [OK].
2
Select the country, then press [OK].
6
Make the settings of user band.
≥
For details, read the manual of the single cable
router, etc.
7
Select “Start Auto Setup”, then press
[OK].
8
Select the search mode, then press
[OK].
Auto Setup starts.
These operations (Searching Satellite and Searching
Channels) may take some time.
After tuning has been completed, clock will be set
automatically.
If the clock setting screen appears, set the time
manually (
>
87, Clock).
To set Power Save settings
1 Press [FUNCTION MENU].
2 Select “Setup” in “Others”, then press [OK].
3 Select “Standby Settings” in “Others”, then press [OK].
4 Select “Power Save in Standby”, then press [OK].
5 Refer to page 20, step 5.
To start Network Easy Setting
1 Press [FUNCTION MENU].
2 Select “Setup” in “Others”, then press [OK].
3 Select “Network Easy Setting” in “Network”, then press
[OK].
4 Refer to page 21.
Auto Setup method when using
a single cable router
Setup
OK
RETURN
DVB Tuning
HDD / Disc
Picture
Sound
Display
Connection
Network
Others
RETURN
DVB Tuning
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
Preferred Language
Signal Condition
Antenna System
Single Cable
LNB Configuration
User Band
You can set C1 to C8. Set to a User
Band not used by any other device.
≥
When only one User Band of the
Router is assigned, set “Tuner 2” side
to “Off”. Note that you will not be able
to record 2 programmes
simultaneously or watch TV during
recording.
User Band
Frequency
Set the User Band Frequency with
number buttons.
User Band
PIN
If the single cable router requires a PIN
to access an user band, enter the PIN.
User Band Settings
OK
Select
RETURN
Start Auto Setup
Please confirm user band settings before starting Auto Setup.
Tuner 1
User Band
User Band Frequency
User Band PIN
Tuner 2
User Band
User Band Frequency
User Band PIN
C1
1284 MHz (preset: 1284 MHz)
Off
C2
1400 MHz (preset: 1400 MHz)
Off
Auto Setup
RETURN
Satellite
Progress
This will take up to 40 minutes.
Checking LNB1
Satellite
Tuner 1
Tuner 2
Press RETURN to skip Satellite installation
Searching Satellite
Checking...
Checking...
DMRXS400EG-VQT3C77_eng.book 23 ページ ２０１１年５月１６日 月曜日 午前９時３分
