G
etting
sta
rte
d
VQT3C77
9
∫
Compatible SD card
– SD Memory Card (from 8 MB to 2 GB)
– SDHC Memory Card (from 4 GB to 32 GB)
– SDXC Memory Card (48 GB, 64 GB)
≥
This unit is compatible with SD Memory Cards that
meet SD Card Specifications FAT12 and FAT16
formats, as well as SDHC Memory Cards in FAT32
format and SDXC Memory Cards in exFAT format.
∫
Setting the protection
∫
Using miniSD card or microSD card
≥
Useable memory is slightly less than the card capacity.
≥
If the SD card is formatted on other equipment, the time necessary for
recording may be longer. Also, if the SD card is formatted on a PC, you
may not be able to use it on this unit. In these cases, format the card on
this unit (
>
68).
≥
SDHC Memory Cards and SDXC Memory Cards can be used in
equipment that is compatible with the appropriate cards. (SDHC Memory
Cards can also be used in equipment compatible with SDXC Memory
Cards)
Using either of these cards in a non-compatible PC or non-
compatible equipment may result in formatting etc. and the loss of
recorded content.
∫
How to hold a disc or SD card
Do not touch the recorded surface or the terminal surface.
∫
If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
∫
Handling precautions
≥
Do not attach labels or stickers to discs.
≥
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥
Do not use ballpoint pens or other hard writing implements,
when writing on the label side of the disc.
≥
Do not expose the terminals of the SD card to water,
garbage or other strange things.
≥
Do not drop stack, or impact discs. Do not place objects on
them.
≥
Do not use the following discs:
– Discs with exposed adhesive from removed stickers or
labels (rental discs, etc.).
– Discs that are badly warped or cracked.
≥
Do not place in the following areas:
– In direct sunlight.
– In very dusty or humid areas.
– Near a heater.
– Locations susceptible to significant difference in
temperature (condensation can occur).
– Where static electricity or electromagnetic waves occur.
Notes for the SD cards
Switch the write-protect switch to the
“LOCK” position.
Mini-type and micro-type cards can
also be used, but must be used with
adaptor cards. These are usually
supplied with such cards, or
otherwise customer provided.
LOCK
e.g.,
Media handling
– Irregularly shaped discs, such as
heart shapes.
DO
DO NOT
DO
DO NOT
DO NOT
DMRXS400EG-VQT3C77_eng.book 9 ページ ２０１１年５月１６日 月曜日 午前９時３分
