56
Security Measures
6
Re-enter your password at [Confirm New Password] and press the
Enter
key.
z
To disable the User Password
Press only the
Enter
key.
7
At [Setup Notice], press the
Enter
key.
z
When you do not want the User Password enabled or changed without
permission:
Set [User Password Protection] using the following procedure:
A
Using the
Ï
key and the
Ð
key, select [User Password Protection] and press
the
Enter
key.
B
Using either the
Ï
key or the
Ð
key, select [Protected] and press the
Enter
key.
8
Press the
F10
key and select [Yes], then press the
Enter
key.
When [Password on boot] is set to [Enable], it is impossible to start the computer without
knowing the password.
NOTE
z
You cannot set [Password on boot] without setting the Supervisor Password. Set the
Supervisor Password if you have not done so (
z
When starting up the Setup Utility, the password input screen will be displayed if a
Supervisor Password or User Password has been set, even if [Password on boot] is
set to [Disable].
When you do not want your computer to be used without
permission
