ANUP5204 Aicure
Irradiation
26
Starting Irradiation
On the operation panel, in the "SHUTTER" section, press the "AUTO
START" button until you hear a beep. The shutter opens, and
irradiation begins.
While the shutter is open, the "OPEN" LED in the "SHUTTER" section
is lit.
After irradiation starts, release the "AUTO START"
button. Even if you hold down the button, after the
set time passes, the shutter closes automatically. If
you press the button again, irradiation stops before
the time runs out.
Ending Irradiation
After the set time passes, the shutter closes automatically, and
irradiation ends.
Stopping Irradiation before the Time Elapses
Press the "AUTO START" button again until you hear a beep. The
shutter closes, and irradiation ends.
Manual irradiation is given precedence over timer irradiation. For this reason, pressing
the "MANUAL OPEN/CLOSE" button or setting pin 9 ("MANUAL START" signal) to "on"
during timer irradiation will disable the timer, and automatically end irradiation.
Warning
Warning
