ANUP5204 Aicure
Irradiation
32
Execute Pattern Irradiation
Select a pattern number and press the "AUTO START" button to begin irradiation according to the
registered pattern.
Switch to Pattern Mode
1
On the operation panel, press the "PATTERN" button until
you hear a beep (at least 3 seconds). The system enters
pattern mode. The LED above the "PATTERN" button
lights, and the pattern number appears in the display.
Select a Pattern Number
2
Press the "SET" button until you hear a beep (at least 1
second). The LED above the "PATTERN" button begins
to flash.
3
Press the up and down arrow buttons to change the
pattern number (0 to 8). Press the up arrow button to
increment the value. Press the down arrow button to
decrement the value.
Pattern number 9 is available via external signals.
Do not select this pattern, as it cannot be used in
ordinary pattern irradiation.
4
Press the "SET" button until you hear a beep (at least 1
second).
Warning
