ANUP5204 Aicure
Replacing the Lamp
41
4
Pull the lamp out from the lamp mounting base.
5
Press the replacement lamp flange into the hole in the
lamp mounting base.
Put the protruding part (A) of the lamp facing up.
6
With the replacement lamp pressed in, push the lamp
mounting bracket down.
If the lamp is not completely locked in place, the level of
illumination will be diminished.
7
Pass the replacement lamp lead wire through the lamp
screw hole, then fasten the knurl nut (removed in step 1)
securely back in place.
8
Replace the lamp cover and lock it in place.
Do not allow a gap between the knurl nut and lamp lead wire terminal.
When you install a new lamp, you must reset the cumulative lamp use time. After
installing the lamp, when you first turn the power on, perform the following steps:
1. Press the "LAMP HOUR" button.
2. Press and hold the "LAMP HOUR" and "SET" buttons until you hear a beep (at
least 1 second).
Warning
Warning
Lamp mounting
bracket
Lamp mounting
base
Lamp
A
Warning
Warning
