2
Introduction
Thank you for your purchase of the Aicure hot ultraviolet curing system. In order to use the system
correctly, please read this User's Manual carefully before use.
Safety Precautions
Please use the following precautions to prevent injuries and accidents
In order to use the system correctly, read this User's Manual carefully before installation, operation, or
inspection. Make sure you have good knowledge of the device, safety information, and these
precautions before use.
This manual classifies safety precautions into two categories: Danger and Warning.
Incorrect handling could result in death or serious injury.
Incorrect handling could result in serious injury or property damage.
Danger
Incorrect handling could result in death or serious injury.
●
Do not subject the eyes or skin to direct or strongly reflected light when the lamp is on. When
operating, use UV-blocking protective goggles.
The ultraviolet light generated by the system includes ultraviolet light with extremely short
wavelength, which could induce inflammation (sunburn) if the skin is exposed to it directly, or its
reflection. In the case of the eyes, exposure over time (several hours) will cause burning and
watering, and the person exposed will not be able to maintain them open.
Warning
Incorrect handling could result in serious injury or property damage.
●
Before repairs or calibration, turn off the power, and unplug the power cord.
●
The system is charged with high voltage. Avoid operating the device with charged parts exposed, or
repairing or calibrating the device with the power turned on. Doing so could cause electric shock.
●
Always earth the system. Failure to do so could cause electric shock.
●
Make sure the lamp is completely cooled (about 30 min. or more after the lamp is turned off), then
remove the cover before replacing the lamp.
While the lamp is on, and immediately after it is turned off, it is very hot and under high pressure. In
this state, it could cause burning. If the lamp breaks, flying shards of glass could cause injury.
●
Do not dismantle or modify the system. Doing so could cause fires or electric shock.
●
Only press the "LAMP ON/OFF" button when the lead wire is firmly attached to the positive side of the lamp.
Pressing the "LAMP ON/OFF" button when the lead wire is touching the frame could cause electric shock.
●
If installing or removing the light guide fiber unit while the lamp is on, be sure to close the irradiation
shutter first.
Exposure to direct or strongly reflected light from the lamp could cause inflammation (sunburn) in
the skin or pain in the eyes.
●
When unplugging the power cord, be sure to grasp both sides of the plug firmly, and pull out by the
plug. Pulling on the cord could break the cord, causing electric shock or a short-induced fire.
●
Do not use the system if the power cord or plug is damaged, or the outlet connection is loose. Doing
so could cause electric shock or a short-induced fire.
●
Keep the power cord unplugged when the system is not in use. Failure to do so could cause
deterioration of the insulation, leading to electric shock or electric leakage and fire.
Danger
Warning
