Panasonic AJ-YA120AG, Руководство по обслуживанию

Страница: 449 / 647

ELE-16
6. A PROC (Audio)
& CUE Boards
6-1. Initial Setting
♦
In order to perform the audio recording and
playback adjustment, Optional Board
AJ-YA120AG should be installed.
<Switches on the Front Panel>
Set the Switch and Control on the Front Panel as
shown below.
Switch & Control Setting
REC VR (CH1, 2, 3, 4) PUSH DOUN
HP VR CENTER
AUDIO MON SELECT ST
REMOTE/MENU/LOCAL LOCAL
<Audio Analyzer Setting>
Set the Audio Analyzer as shown below.
Item Setting
GENERATOR OUTPUT
50
Ω
(A&B, BAL, FLOAT)
ANALYZER CHA INPUT
100
Ω
ANALYZER CHB INPUT 100
Ω
UNIT SETTING dBu
<Service Menu Setting>
1. Turn ON the 2
nd
pin of DIP SW1 on the V
OUT/SYS Board.
2. Set the REMOTE/MENU/LOCAL switch on the
right side of Front Panel to the MENU position so
that the “Service Menu” appears.
3. Move the cursor to the following number and set
each item.
No. Item
Setting
G01 REF. LEVEL1
P : FS20
E/MC : FS18
G02 REF. LEVEL2 0dB
G03 REF.LV INI
P/E : 0dB
MC : 4dB
G21 IN IMP INI HIGH
G22 AUD OUT SELUE TYPE 1
< Setup Menu Setting for Audio >
1. Set the REMOTE/MENU/LOCAL switch on the
right side of Front Panel to the MENU position so
that the “Service Menu” appears.
2. Move the cursor to the following number and set
each item.
Setting No. Item
P/E MC
700 AUDIO IN SE L ANA
701 CH1 IN LV 0dB +4dB
702 CH2 IN LV 0dB +4dB
703 CH3 IN LV 0dB +4dB
704 CH4 IN LV 0dB +4dB
706 CH1 OUT LV 0dB +4dB
707 CH2 OUT LV 0dB +4dB
708 CH3 OUT LV 0dB +4dB
709 CH4 OUT LV 0dB +4dB
730 REC CUE CH1+2
731 PB FADE AUTO
732 EMBEDED AUD ON
765 CUE OUT SEL OFF
769 MONI SEL PLYPCM
770 MONITOR MIX STEREO
771 H.PHONE MIX STEREO
780 AUD OUT SEL LINE
781 IN IMP SEL HIGH