Panasonic AJ-YA120AG, Руководство по обслуживанию

Страница: 233 / 647

INF-11
7. DIAG-MENU DISPLAY
The DIAG-MENU is the menu for investigating the status of the VTR, and it has the indicated information.
• Hour meter display (HOUR METER information)
• Software (Microcomputer) version display (SOFT VERSION information)
• DIF status and UID display (This information only displayed, when IEEE1394 IF Board (AJ-YAD120AG) has
been installed.
• PLD version display (PLD VERSION information)
7-1. DIAG-MENU Operation Method
1. Press the “EJECT” button on the Front Panel and simultaneously set the “LOCAL/MENU/REMOTE” switch
on the Front Panel to the “MENU” position so that the “HOURS METER” displays on the monitor and Front
Display.
2. Press the “SEARCH” button so that the “SOFT VERSION” displays on the monitor TV and Front Panel.
3. Press the “SEARCH” button so that the “DIF STATUS” and “UID Number” are displayed on the monitor
and Front Display.
4. Press the “SEARCH” button again then the display changes to the “HOURS METER” display.
5. The Diag Menu is closed by setting the “LOCAL/MENU/REMOTE” switch to the “LOCAL” or “REMOTE” .
DIAG-MENU HOURS METER
Ser. * * * * * * * *
* H00 OPERATION 12H
H01 DRUM RUN 4H
H02 TAPE RUN 2H
H03 THREADING 252T
H04 F LOADING 174T
H11 DRUM RUN r 4H
H12 TAPE RUN r 2H
H13 THREADING r 252T
H14 F LOADING r 174T
H30 POWER ON 10T
END
Press
“SEARCH” Button
H0 00 ** **
H0 10 ** **
H0 20 ** **
H3 00 ** **
H1 40 ** **
H1 30 ** **
H1 20 ** **
H1 10 ** **
H0 40 ** **
H0 30 ** **
IF 1 1 7 0 0 0
Au 1 1 7 0 0 0
Sr 1 2 0 0 0 0
<Front Display>
<Display on Monitor >
DIAG-MENU DIF STATUS 1
Mode CNT 2
MY ID 0
ROOTID 1
IRM ID 1
RCV ID
GAP CNT 5
EUI-64 0080458212345678
Press
“SEARCH” Button
Pressing
“UP” or
“DOWN”
Button
Pressing
“UP” or
“DOWN”
Button
Press
“SEARCH”
Button
DIAG-MENU SOFT VERSION
<NTSC>
SYSIF
1.17 D3A4
AVDV 1.23 D3D3
SERVO 1.20 FF95
END