– 205 –
Chapter 11 Maintenance and Inspection — Warning system
Display
Description
Behavior and cause
[INVALID VALUE!]
The data value you entered is invalid.
Enter data within the normal range.
[LACK OF CAPACITY!]
There is not enough recording capacity left on the card. Insert a card with sufficient recording capacity.
[MISSING CLIP!]
Shot marks cannot be attached to the clips unless all
clips recorded over multiple P2 cards are present.
Insert all P2 cards over which recording extended.
[NO CARD!]
No P2 or SD memory card is inserted.
Insert the relevant media.
[NO COPY TO SAME CARD!]
A clip cannot be copied to the card storing the original
clip.
Copy the selected clip to a card that does not contain
the original clip.
[NO FILE!]
The specified file does not exist.
Check the file.
[NO INPUT!]
No data is entered.
Enter data and then set.
[NO SD CARD!]
No SD memory card.
Insert an SD memory card.
[NOT SELECTED!]
Attempted to delete without selecting clips.
Select clips to delete.
[SAME CLIP IS SELECTED!]
Multiple instances of the same clip (copies) are included
in the clips selected.
Multiple instances of the same clip (copies) cannot be
copied simultaneously. Remove instances of the same
clip from selected items.
[TOO MANY CLIPS!]
Too many clips are selected.
Reduce the number of selected clips.
[UNKNOWN CONTENTS FORMAT!]
This is a warning of the contents for the version that is
not supported by the camera.
Match the device and content versions.
You cannot write back only proxy recording clips from
the FTP server to the P2 card.
Write back (import) proxy recording clips to an SD
memory card.
[UNKNOWN DATA!]
The metadata character code is invalid.
The metadata character code is UTF-8. Enter valid
characters using a viewer.
There is a problem with data in the file.
Create the file again.
[USER CLIP NAME MODIFIED!]
When adding a counter value to the clip name,
characters must be deleted.
For the counter addition setting, the user clip name plus
the counter value can only contain up to 100 bytes.
Characters in the clip name are automatically deleted
when the total number of characters exceeds this limit.
[WRITE PROTECTED!]
The P2 card or SD memory card is write-protected.
Insert write-accessible media.
During soft keyboard operation
Display
Description
Behavior and cause
[AUTHENTICATION ERROR!]
Manual authentication failed.
Enter the correct password.
[CANNOT CHANGE!]
An attempt is made to enter the [PERSON] item (user
who enters the memo) when there is no text memo.
Enter the [TEXT] (text information) first.
[CANNOT SET!]
[INVALID VALUE!]
The entered value is invalid.
Change the input value.
[CANNOT SET!]
[NO INPUT!]
There is not input to the software keyboard.
Enter the password.
[CANNOT SET!]
[RETRY PASSWORD IS DIFFERENT!]
The re-entered password is different.
Enter the correct reference password.
During USB host mode
Message
Description
Measure
[CANNOT ACCESS CARD!]
An error occurred while accessing the P2 card.
Check the P2 card.
[CANNOT ACCESS TARGET!]
An error occurred while accessing the connection target. Check the storage device status and connection.
[CANNOT COPY!][FORMAT STORAGE
DEVICE TO FAT]
The partition that can copy clips does not exist on the
storage device.
Reformat in FAT format, or export the P2 card to create
a partition.
[CANNOT FORMAT!]
The storage device cannot be formatted.
Change the connected storage device.
[CANNOT RECOGNIZE STORAGE
DEVICE!]
The storage device is not correctly recognized.
Reboot the storage device or connect another storage
device.
[CANNOT SELECT!][MAX. 6 PARTITIONS]
Storage devices with more than six partitions cannot be
selected (mounted simultaneously).
Release selected partitions.
[CARD IS EMPTY! CANNOT COPY!]
The P2 card to copy is empty.
The copy operation is not performed because the card
is empty.
[FORMAT P2 CARD!]
Cannot import to a P2 card containing clips.
Format the P2 card.
[LACK OF CAPACITY!]
Not enough space left on the storage device.
Use a new storage device with sufficient available space
or a formatted storage device.
[MISMATCH COMPONENT!]
The P2 card model number of the copy source and copy
destination do not match. Cannot copy.
Use the P2 cards of the same model number, or import
on a clip basis.
[STORAGE DEVICE DISCONNECTED!]
The connection with the storage device is disconnected.
Reconnect the USB cable to the <USB2.0> terminal
(host). When it does not function normally after that, turn
off the power once and turn on the power again.
[TOO MANY PARTITIONS!]
There are too many partitions.
The maximum number of partitions on the storage
device is 23. Either reformat, or use a new storage
device.
[UNKNOWN DEVICE CONNECTED!]
A non-compatible DVD drive or other device is
connected.
Change the connected device to the correct storage
device, and then turn off the power once and turn on it
again.
Содержание AJ-PX800G
Страница 9: ...Before using the camera read this chapter Chapter 1 Overview ...
Страница 153: ...Details displayed on the viewfinder are described Chapter 8 Display ...
Страница 177: ...This chapter describes how to use the camera by connecting to network Chapter 10 Network Connection ...
Страница 210: ...This chapter describes the specifications of this product Chapter 13 Specification ...