Panasonic AJ-PX800G, Руководство по эксплуатации

Страница: 186 / 220

– 186 –
Chapter 10 Network Connection — Network function
Network function
P2 browser function settings
Starting application (P2 Browser) from web browser
After completing the network connection with your mobile device or computer, start the browser of the mobile device or computer, and then start the
application (P2 Browser).
Fig. 1
1
Select [BROWSE] or [BROWSE ( + CTRL)] in the main menu → [NETWORK SETUP] → [NETWORK FUNC] → [HTTP SERVER].
P2 browser function is enabled.
2
Start the browser of your mobile device or computer (Safari, Internet Explorer).
3
Enter the IP address set for the camera in the address entry field of the browser.
f
Factory setting: [192.168.0.1]
4
If you use a computer, press the Enter key, and if you use iPad/iPhone, tap the GO button.
The web application (P2 Browser) starts up.
5
Enter [USER NAME] and [PASSWORD] on the entry screen.
Enter [USER ACCOUNT] (Factory setting: [guest]) and [PASSWORD] (Factory setting: [p2guest]) that have been set for the camera.
When a screen like (Fig. 1) appears, the connection has been established.
User account name and password can be set in the main menu
→ [NETWORK SETUP] → [NETWORK FUNC] → [USER ACCOUNT].
Accounts can be created or deleted, and the passwords can be changed in the main menu → [NETWORK SETUP] → [NETWORK FUNC] →
[ACCOUNT LIST].
Enter up to 31 characters for a user account, and characters between 6 and 15 for a password.
For information on P2 Browser, refer to the User Guide of “P2 Web Application” on the following website:
http://pro-av.panasonic.net/en/manual/index.html
@ @ NOTE
t
When [NETWORK SEL] is [OFF] or set to [4G/LTE], the P2 browse function cannot be used.
Network operation status display (mode check function)
Push the <DISP/MODE CHK> switch on the camera towards the <CHK> side twice to check the network operation status in the mode check
[FUNCTION] screen.
For details, refer to “[FUNCTION] screen” (page 159).