Panasonic AJ-PX800G, Руководство по эксплуатации

Страница: 141 / 220

– 141 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[BATT STAT NEAR END] Selects the near end percent value.
When the battery charge level percentage cannot be detected, this will follow the near end voltage value
set for [TYPE A].
[4%], [5%], [6%], [7%], [8%], [9%], [10%], [12%], [14%], [16%], [18%], [20%]
f
Factory setting: [5%]
If a battery whose remaining charge is displayed in units of 10% is used, the setting value and actual near
end warning may vary slightly.
[BATT STAT END] Selects the end percent value.
When the battery charge level percentage cannot be detected, this will follow the end voltage value set for
[TYPE A].
[1%]…[10%]
f
Factory setting: [1%]
When using a battery which displays battery charge level by units of 10%, an end is determined only in two
stages: when it is set between [1%] and [5%], or when it is set between [6%] and [10%].
[ENDURA STAT NEAR
END]
Selects the near end percent value.
When the battery charge level percentage cannot be detected, this will follow the near end voltage value
set for [TYPE A].
[4%], [5%], [6%], [7%], [8%], [9%], [10%], [12%], [14%], [16%], [18%], [20%]
f
Factory setting: [5%]
If a battery whose remaining charge is displayed in units of 10% is used, the setting value and actual near
end warning may vary slightly.
[ENDURA STAT END] Selects the end percent value.
When the battery charge level percentage cannot be detected, this will follow the end voltage value set for
[TYPE A].
[1%]…[10%]
f
Factory setting: [1%]
When using a battery which displays battery charge level by units of 10%, an end is determined only in two
stages: when it is set between [1%] and [5%], or when it is set between [6%] and [10%].
[CARD FUNCTIONS]
Configure the settings regarding reading/writing of the scene files and user files to SD memory cards.
Item Description of settings
[SCENE FILE] Loads scene files from an SD memory card or saves them to an SD memory card.
[LOAD]: Loads scene files.
[SAVE]: Saves scene files.
[USER FILE] Loads user files from an SD memory card or saves them to an SD memory card.
[LOAD]: Loads user files.
[SAVE]: Saves user files.
[CAC FILE] Loads CAC files from an SD memory card or deletes CAC files stored in the SD memory card.
[LOAD]: Loads CAC files. Specifies the file number when saving a loaded CAC file in the SD memory card
to the camera.
[DELETE]: Deletes CAC files stored in the SD memory card.
[SD CARD PROPERTY] Displays the SD memory card status. The format condition, available space, etc. can be checked.
[FORMAT SD CARD] Formats an SD memory card.
[OTHER FUNCTIONS]
Configure these items to make settings for reading/writing, initialization of user file data on the internal memory, and the camera settings.
Item Description of settings
[USER FILE] Loads/saves/initializes user files on the camera memory.
[LOAD]: Loads user files.
[SAVE]: Saves user files.
[INITIALIZE]: Restores user files to the factory settings.
[ACCESS LED] Selects whether to light the access LED of the P2 card.
[ON], [OFF]
f
Factory setting: [ON]
[REC TALLY] Sets the tally lamp display in the viewfinder.
[RED]: Illuminates the red tally lamp on the viewfinder during recording with the camera. The front tally
lamp and the back and rear tally lamps on the body are also illuminated.
[GREEN]: Illuminates the green tally lamp in the viewfinder during recording with the camera. The front
tally lamp or the tally lamps on the body are not illuminated
[CHAR]: During recording with the camera, the tally lamp in the viewfinder is not illuminated and the
recording status is displayed only with text on the screen. No tally lamps are illuminated.
f
Factory setting: [RED]
[CLOCK SETTING] Sets the built-in calendar (date and time).
[TIME ZONE]
For GMT, set using 30 minute intervals from − 12:00 to + 13:00 (however, + 12:45 is possible). After setting
the time, when changing the setting value for [TIME ZONE], the displayed and registered times switch to
the time with the time difference.