Panasonic AJ-PX800G, Руководство по эксплуатации

Страница: 192 / 220

– 192 –
Chapter 10 Network Connection — Using FTP client function
t
Depending on the FTP server and the connection environment, error messages may not be displayed correctly.
t
To discontinue the connection procedure, press the <SET> button.
t
If an error occurs, perform the operation again.
t
An error may occur when a network operation is performed immediately after inserting a LAN cable or connecting via wireless LAN, or when an
operation is performed again immediately after cancelling the previous operation.
t
If the connector error persists even after several operations, check first with the main menu → [NETWORK SETUP] → [NETWORK TOOLS] →
[PING]. Note that connection to FTP may succeed even when [PING] fails. If connection cannot be established even after checking with PING, consult
the system administrator in charge of the network environment.
t
When [PING] fails, check the following items.
- Network configuration is correct
- LAN cable is correctly inserted
- Hubs and routers in the path operates normally
t
When connection is not established even after [PING] has succeeded, check the following items.
- Server function services of the FTP server are running
- There is not a firewall in the communication path
- User ID and password that permits access to the FTP server have been set
t
Some on-screen operations may not be possible for a while after the use of FTP client function has been cancelled.
Cursor button operation on the FTP explorer screen
I
: Contents of the subfolder at the cursor position are displayed.
Y
: Contents of higher-level folder to the current folder are displayed.
`
/
{
: The cursor moves.
<SHIFT> button + cursor buttons (
`
/
{
): Moves the cursor to the top/bottom folder on the list.
@ @ NOTE
t
Depending on server operating specifications or access rights setting, folder contents or folder path may not be displayed correctly.
t
The cursor position of the previous folder is stored. If an error occurs, the cursor position will be reset to the top folder.
t
If a thumbnail has been displayed, only the cursor position in the previously displayed folder list will be stored.
FTP thumbnail screen
1
1 FTP server/folder information
[URL]: The address of the connected FTP server
[USER ID]: ID of the user who has logged in
[SSH]: [ENABLE]/[DISABLE] indication in the main menu
→ [NETWORK SETUP] → [FTP CLIENT SERVICE] → [SSH]
[PATH]: Path in the FTP server of the folder where currently displayed thumbnails are contained
[DATE]: Date of last update
[TIME]: Time of last update
@ @ NOTE
t
When a proxy recording clip is displayed on the FTP explorer screen, [P.only] is displayed on the thumbnail. This is displayed only on proxy clips to
indicate that the main recording video and audio data are not included.
t
Press the <EXIT> button to return to the explorer screen.
t
The 1001st clip and subsequent clips cannot be displayed.
t
The date and time information displays either local time or world standard time, which depends on the information from the FTP server.
t
Opening thumbnails using [ . ] will not display the date and time of the folder.
Deleting clips on the FTP server
Clips on the FTP server that are no longer necessary can be deleted in the same way as clips on P2 cards.
For details, refer to “Deleting clips” (page 108).
@ @ NOTE
t
If you leave the FTP thumbnail screen displayed, the FTP server may be disconnected after a while. After the server has been disconnected, clips
cannot be deleted. In this case, return to the FTP explorer screen, display the FTP thumbnail screen again, and then delete clips.