Panametrics DigitalFlow DF868 Скачать руководство пользователя страница 91

Страница: 91 / 160

DigitalFlow™ DF868 Multipurpose Ultrasonic Liquid Flowmeter Programming Manual (2-Channel)

Chapter 4. Printing Data

4.6 Stop Printing

Use the

STOP

submenu to terminate the printing of live, logged or site data. To stop any active printing activity, see

Figure 16 on page 103, and complete the following steps:

IMPORTANT:

Make sure that a printer has been properly set up before proceeding with this section.

To access the

Print Menu

, press the

[PRNT]

key.

Note:

The

Print Menu

is not protected by the security feature and a password is never required to access this

menu.

Press

[F4]

STOP

Press

[F1]

to continue printing or press

[F2]

Stop

the currently active printing job.

Note:

After the STOP command has been issued, the printer will complete the printing of any data already in the

printer buffer. Either wait for the printer to finish or turn the printer off to empty the buffer immediately.

The Model DF868 returns to the standard data display screen and normal measurement taking.

Содержание DigitalFlow DF868

































































































































































Результаты поиска

Содержание DigitalFlow DF868

Отзывы:

Panametrics DigitalFlow DF868, Руководство по программированию, Страница: 91 / 160

Результаты поиска

Содержание DigitalFlow DF868

Отзывы: