ORTECO IIa Series, Руководство по эксплуатации и обслуживанию

Страница: 96 / 114

90
ENCLOSURES
A
English language Use and maintenance
api-anonima petroli italiana S.p.A .
PRODUCT SAFETY DATA SHEET
Product :
IP TARUS TURBO EXTRA (SAE 15W-40)
Page : 4/7
Product code : IP3301 Version : 2 Date : 22/01/2010
Supersedes SDS dated : 17/05/2005
8.2 Control of exposure
General informations:
In case the concentration of the product or any constituent is above the exposure
limits, and if plant characteristics, work procedures and other means are not able to
reach the purpose, it is necessary to use suitable means of personal protection.
Respiratory protection:
Open or well ventilated areas: not necessary.
Closed or confined areas (e.g. tank interiors): self-contained breathing apparatus.
Personal protection:
Long-sleeved overalls. If necessary, refer to the EN 943-13034-14605 standards
When there is a risk of contact with the eyes, use safety goggles or other means of
protection. If necessary, refer to national standards or to the EN 166 standard.
When there is a risk of contact with the skin, use hydrocarbon-resistant, felt-lined
gloves.
Experience shows that gloves made of Nitrile rubber or PVA (Polyvinylalcohol) are
adequate for this use.
Gloves made of PVC can be used for limited periods.
Gloves made of Neoprene or natural rubber (latex) have inadequate resistance.
Use gloves respecting all the conditions and within the limits set by the manufacturer.
Replace gloves immediately in case of cuts, holes or other signs of damages or
degradation.
If necessary, refer to the EN 374 standard.
Hygiene measures:
Avoid contact with skin and eyes
Do not breathe vapours or mists.
Do not clean hands with dirty or oil-soaked rags.
Do not keep dirty rags in the overall pockets.
Do not drink, eat or smoke with dirty hands.
Wash hands with water and soap, do not use solvents or other irritant products
which have a defatting effect on the skin.
Do not re-use clothes, if they are still contaminated.
9. Physical and chemical properties (typical values).
Appearance:
Liquid, bright & clear (ASTM D 4176/1).
Odour:
Characteristic.
Colour
Not determined (ASTM D 1500)
Density a 15°C:
885 kg/m
³
(ASTM D 1298).
Boiling point/range:
> 200 °C (at 10 mmHg) (ASTM D 1160)
Vapour pressure:
1·10-3 hPa (20 °C)
Viscosity at 40°C:
N.D. (ASTM D 445).
Viscosity at 100°C :
14.5 mm
²
/s (ASTM D 445).
Solubility in water:
Insoluble in water
pH :
Not applicable (ASTM D 1287).
Pour point:
-24 °C. (ASTM D 97)
Flash point :
225 °C. (ASTM D 92)
Auto-ignition temperature:
> 300 °C (DIN 51794)
Explosion limits:
- Lower:
Not determined.
- Upper:
Not determined.
Partition coefficient (P o/w):
Not determined.