ORTECO IIa Series, Руководство по эксплуатации и обслуживанию

Страница: 80 / 114

74
ENCLOSURES
A
English language Use and maintenance
PRODUCT SAFETY DATA SHEET
Version : 1
Product :
IP HYDRUS OIL H.I. (ISO
4
6)
Product code : IP402
1
Page : 3/6
Date : 01/03/2006
a p i - a n o n i m a p e t r o l i i t a l i a n a S p A
- Water: Confine the spillage. Remove from surface by skimming or suitable absorbents.
Notify local authorities according to regulations.
Do not use solvents or dispersants.
7. Handling and storage.
Storage: Keep away from sources of ignition.
Storage temperature: ambient to 65°C max .
Handling: Store the product in cool, well ventilated surrounding.
Keep away from sources of ignition.
Avoid contact with skin
Do not breathe vapours or mists.
Do not smoke.
Do not cut, weld, drill, burn or incinerate empty containers or drums, unless they
have been cleaned, and declared safe.
8. Exposure controls/personal protection.
8.1 Exposure limit values
Exposure limits:
TLV-TWA (A.C.G.I.H. 2005): 5 mg/m³ (mineral oil mists)
TLV-STEL (A.C.G.I.H. 2005): 10 mg/m³ (mineral oil mists)
If necessary, take into account the other limits listed in the relevant workplace
regulations, or in the ACGIH documents.
Monitoring procedures: Refer to relevant legislation and in any case to the good practice of industrial
hygiene.
8.2 Control of exposure
General informations:
In case the concentration of the product or any constituent is above the exposure
limits, and if plant characteristics, work procedures and other means are not able to
reach the purpose, it is necessary to use suitable means of personal protection.
Respiratory protection: Open or well ventilated areas: not necessary.
Closed or confined areas (e.g. tank interiors): self-contained breathing apparatus.
Personal protection: Long-sleeved overalls. If necessary, refer to the EN 465-466-467 standards
When there is a risk of contact with the eyes, use safety goggles or other means of
protection. If necessary, refer to national standards or to the EN 166 standard.
When there is a risk of contact with the skin, use hydrocarbon-resistant, felt-lined
gloves.
Experience shows that gloves made of: Nitrile rubber, PVA (polyvinylalcohol), PVC
are adequate for this use.
Gloves made of: Natural rubber (Latex), Neoprene rubber have inadequate
resistance.
Use gloves respecting all the conditions and within the limits set by the manufacturer.
Replace gloves immediately in case of cuts, holes or other signs of damages or
degradation.
If necessary, refer to the EN 374 standard.
Hygiene measures: Avoid contact with skin and eyes
Do not breathe vapours or mists.
Do not clean hands with dirty or oil-soaked rags.
Do not keep dirty rags in the overall pockets.
Do not drink, eat or smoke with dirty hands.