ORTECO IIa Series, Руководство по эксплуатации и обслуживанию

Страница: 40 / 114

UN21-0165EI
II
III
IV
I
VI
V
E
0
2
1
B
A
C
34
English language Use and maintenance
INFORMATION FOR USE
6
Shifting procedure
Caution - Care
The operator must control the machine from the ground.
Turn (both forwards and backwards) gradually to reduce the wear of the tracks.
The controls must be operated gently and smoothly to avoid sudden movements of
the machine which could injure the operator or people nearby.
Unauthorised persons are prohibited from standing or moving in the work area.
For short journeys (between a driven pile and the next one to be driven) keep the pile-
driver in working position and control the machine from the position (E) foreseen for the
operator.
For transfers at the work site put the pile-driver in resting position (C) and control the ma-
chine from the position (E) foreseen for the operator.
Proceed as outlined below.
1) Start the engine (see “Starting the engine”).
2) Move levers (A) and (B) at the same time towards the position (1) to move the machine
forwards in the direction (I).
3) Move levers (A) and (B) at the same time towards the position (2) to move the machine
forwards in the direction (II).
4) Move the lever (A) further than the lever (B) towards the position (1) to gradually turn in
the direction (IV).
5) Move the lever (A) further than the lever (B) towards the position (2) to gradually turn in
the direction (VI).
6) Move the lever (B) further than the lever (A) towards the position (1) to gradually turn in
the direction (III).
7) Move the lever (B) further than the lever (A) towards the position (2) to gradually turn in
the direction (V).