ORTECO IIa Series, Руководство по эксплуатации и обслуживанию

Страница: 67 / 114

61
English language Use and maintenance
MAINTENANCE INFORMATION
7
Cleaning and lubrication of hammer lifting chain
Danger - Warning
The percussion hammer lifting chain is a fundamental safety device therefore it must
be maintained efficient through regular maintenance.
The lifting chain wears quickly if it is not regularly lubricated.
The lubrication frequency shown in the maintenance schedule chart refers to normal use.
If the chain is exposed to greater stress (dust, temperature, or intensive use) the chain must
be lubricated more often.
If the chain is damaged, worn, corroded, etc., it must be replaced immediately (see “Replac-
ing the chain”).
Proceed as outlined below.
1) Stop the machine on solid and even ground.
2) Switch off the engine and remove the ignition key and keep it in a safe place.
3) Clean the chain with diesel oil or petrol or a paraffin-derived product.
4) Lubricate with spray lubricant for chains following the indications.
During this operation the chain must not be tensioned.
Caution - Care
To avoid damaging the chain, do not clean it with steam jets and corrosive deter-
gents.
Machine cleaning
Clean the jack rods to avoid dirt build-up.
Wash the machine with a high-pressure water jet using legally approved non-toxic and non
flammable detergents.
Caution - Care
Do not spray the water on the electrical parts, as this could damage them.