manualshive.com logo in svg

ORTECO IIa Series, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
ORTECO IIa Series Скачать руководство пользователя страница 52

UN21-0133DH      

A

B   

UN21-0138EH

E

W

46

English language

Use and maintenance

INFORMATION FOR USE

6

Alternative perforation and pile driving procedure

Refuelling of air lubricating oil 
The oil used the first time is of the ISO VG32 type for pneumatic tools, suitable for winter 
temperatures.
In the summer period use oil for pneumatic tools of the ISO VG100 type.

Removing the boring device
To remove the boring device carry out the fitting operations described above in reverse 
order.

Boring device maintenance
For maintenance operations refer to the manual of the manufacturer of the boring device.

The boring device can remain fitted also during the pile 
driving phase.
A)  Correct work configuration.
B)  This configuration is not allowed as the pile driving 

vibrations would damage the boring head.

Information

To operate in configuration “A” the pin (E) and the 
split pin (W) must be removed.

Содержание IIa Series



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды