ORTECO IIa Series, Руководство по эксплуатации и обслуживанию

Страница: 22 / 114

16
English language Use and maintenance
SAFETY INFORMATION
3
Keep a safe distance from the lines of public utilities. In case of work near buried pipe-
lines or cables (gas or water pipes, electric cables) contact the provider requesting
assistance to search for the lines and eventually disable them.
Do not fill the fuel tank when smoking, when the engine is on or hot or near naked
flames.
Safety instructions for handling and transportation
Lifting and handling operations must be carried out following the information on the
machine and in the manufacturer’s use manual.
Loading, unloading, handling and lifting operations must be carried out by qualified
and authorised personnel that has received specific training.
Before transferring the machine check that the machine and its components are an-
chored to the means of transport to avoid uncontrolled movements and check that
the profile is within the foreseen overall dimensions. If necessary apply the necessary
markings.
Safety instructions for adjustments and maintenance
Maintenance is of primary importance for the efficiency and reliability of the machine
and is one of the most important safety elements.
Maintenance schedule operations must be carried out at the set intervals and in the
manner foreseen by the manufacturer.
For maintenance operations that require special equipment and/or specialised knowl-
edge contact the authorised assistance centres.
Before carrying out any maintenance or adjustment operation lower the hammer to
the ground, switch off the engine and remove the ignition key.
Servicing of hydraulic components must be carried out only with the system depres-
surised.
When searching for oil leaks from hydraulic components, all the necessary measures
must be taken to avoid injuries (perforations) caused by the pressurised oil.
Worn parts must be replaced with original spare parts.
Before working on the engine or near it, make sure it is cold.
Dispose of polluting material in compliance with the regulations in force in the coun-
try of use; do not fly tip it.
Keep the engine, battery, fuel tank and hydraulic oil tank areas clean to avoid the risk
of fire caused by the build-up of residues.
Before any adjustment operation activate all safety devices foreseen and assess
whether personnel working nearby must be informed of the operation.
At the end of the operations, before starting the machine, check that there are no
tools, cloths or other material near the moving parts or in risk areas.