ORTECO IIa Series, Руководство по эксплуатации и обслуживанию

Страница: 41 / 114

UN21-0330FL
II
III
IV
I
VI
V
E
0
2
1
B
A
C
D
35
English language Use and maintenance
INFORMATION FOR USE
6
Shifting on slopes procedure
Danger - Warning
Travel only on slopes within the maximum slope limits foreseen by the manufacturer
(see “Technical characteristics”).
On sloping ground keep the percussion hammer completely lowered to increase ma-
chine stability.
In the case of long stretches on sloping ground keep the pile driver in resting position
(C) to increase machine stability.
Avoid moving transversally to the slope; move vertically (up-down and vice versa).
The gradient that can be tackled depends on various factors: the type of ground (soft,
slippery, wet or markedly uneven), the speed and visibility.
When working on sloping ground the operator’s experience and good sense prevail
over any rule.
Proceed as outlined below.
1) Start the engine (see “Starting the engine”).
Danger - Warning
On sloping ground travel at minimum speed to prevent the risk of the machine over-
turning.
2) Move levers (A) and (B) at the same time towards the position (1) to move the machine
forwards in the direction (I).
3) Move levers (A) and (B) at the same time towards the position (2) to move the machine
forwards in the direction (II).
4) Move the lever (A) further than the lever (B) towards the position (1) to gradually turn in
the direction (IV).
5) Move the lever (A) further than the lever (B) towards the position (2) to gradually turn in
the direction (VI).
6) Move the lever (B) further than the lever (A) towards the position (1) to gradually turn in
the direction (III).
7) Move the lever (B) further than the lever (A) towards the position (2) to gradually turn in
the direction (V).
E) Control position foreseen for the operator