ORTECO IIa Series, Руководство по эксплуатации и обслуживанию

Страница: 56 / 114

UN21-0139DI
B
A
2
1 C
UN21-0140DI
X
Y
A B C
D
E
50
English language Use and maintenance
INFORMATION FOR USE
6
Using the verticality system
General description
The verticality system is used to automatically place the column in vertical position.
The main components of the verticality system are shown in the figure.
A) Control panel: to manage the column automatic verticality system.
B) Electronic control unit: to check the vertical position of the column by means of soft-
ware incorporated in the component.
The software can be updated or reinstalled via personal computer connected to the
can/usb gateway (1) connector or via the internet (remote assistance).
The 10 A fuse (2) protects the electronic control unit against overcurrents.
C) Angular sensor: the sensor detects the incorrect position of the column and sends the
signal to the electronic control unit, which switches on the red signal lights and the
green signal light.
Controls and signals/gauges
A) Key switch: to activate the automatic verticality sys-
tem functions.
B) Red signal light.
- Signal light off: this indicates the correct vertical po-
sition of the column in relation to the axis (X).
- Signal light on: this indicates the incorrect vertical
position of the column in relation to the axis (X).
- Flashing signal light: this indicates that the auto-
matic verticality system is out of range due to the
excessive inclination of the column compared to the
axis (X).
C) Red signal light.
- Signal light off: this indicates the correct vertical po-
sition of the column in relation to the axis (Y).
- Signal light on: this indicates the incorrect vertical
position of the column in relation to the axis (Y).
- Flashing signal light: this indicates that the auto-
matic verticality system is out of range due to the excessive inclination of the column compared to the axis (Y).