ORTEC Detective X Скачать руководство пользователя страница 40

Страница: 40 / 131

ORTEC

Detective

X Handheld Radioisotope Identifier

1107231N / 082020

Figure 35. Detective X Status Indicators

Screen name.

Message space for elapsed time, high dose rate, and other system information.

System errors including gain stabilizer status, USB storage issues, and personnel hazard warnings (for the

complete list of system errors, see Section 4.5.3).

System readiness indicator.

Status: Ready 0%

indicates the detector is at operating temperature and

all hardware and software is ready for use. The “#%” text indicates the current HPGe detector dead-time

percentage. Note that dead time is only displayed when the system is in the READY state.

Current date and time in Coordinated Universal Time (UTC; also known as Zulu time).

Low-Confidence Expert (LCX) mode indicator, displayed when LCX mode is enabled (see Section 4.6.5).

Gain stabilizer disabled indicator. Displayed only when the stabilizer is disabled.

Mobile Field Kit (MFK) connection status. Displayed only when the MFK interface has been enabled. Blue

indicates connected. Red indicates not connected.

WiFi connection status. Green indicates connected. Grey indicates no connection. Red indicates WiFi has

been disabled. Note that WiFi is automatically disabled when a wired network connection is established.

10.

Bluetooth headset connection status. Green indicates connected. Grey indicates no connection. Red

indicates Bluetooth has been disabled.

11.

Speaker enabled or disabled (disabled shows slash/enabled does not).

12.

GPS location determined when green, otherwise red.

13.

Power system status. External power with battery charged, external power with battery charging, or

battery capacity remaining (for battery time in minutes, see the Status screen shown in Figure 85).

14.

Gamma dose rate.

15.

Total gamma count rate.

16.

Neutron count rate (if neutron detector is connected).

The startup screen for Detective X is the Detect Mode screen (Figure 36). All other screens are accessible

from this screen through a menu hierarchy. The Detect mode screen is useful for locating and in most cases

also identifying radioactive sources. The Detect Mode screen performs a complete analysis of recently

collected data twice per second and shows recent history. However, data collected from the Detect Mode

screen are not saved. See Section 4.6 for a detailed discussion of Detect Mode.

Содержание Detective X




































































































































Результаты поиска

Содержание Detective X

Отзывы:

Похожие инструкции для Detective X

Бренды по названию

Популярные бренды

ORTEC Detective X, Руководство пользователя

Результаты поиска

Содержание Detective X

Отзывы:

Похожие инструкции для Detective X

Бренды по названию

Популярные бренды