Oriental motor NETC01-M3, Руководство пользователя

Страница: 50 / 62

G eneral speci fi cations
−50−
12 General specifications
„
Environment specification
Operation environment
Storage environment
Shipping environment
Ambient temperature
0 to +40 °C (+32 to +104 °F)
(non-freezing)
−25 to +70 °C (−13 to +158 °F)
(non-freezing)
Humidity 85% or less (non-condensing)
Altitude
Up to 1000 m (3300 ft.) above
sea level
Up to 3000 m (10000 ft.) above
sea level
Surrounding atmosphere No corrosive gas, dust, water or oil
„
Insulation specification
Insulation resistance
Between FG terminal and
power supply terminals
100 M Ω or more when 500 VDC megger is applied
Dielectric strength
Sufficient to withstand 500 VAC at 50/60 Hz applied for
1 minute, leak current 10 mA or less.
„
RS-485 communication specification
Electrical characteristics
In conformance with EIA-485, straight cable
Use a twisted pair cable (TIA/EIA-568B CAT5e or higher is recommended) and
keep the total wiring distance including extension to 50 m (164 ft.) or less.
Communication mode Half duplex, Asynchronous mode (data: 8 bits, stop bit: 1 bit, parity: none)
Transmission rate 625 kbps
Protocol Frame size: 10 bytes (fix), binary transmission
Maximum number of
connected units
8 units or 16 units (it varies depending on the operation mode.)
„
MECHATROLINK- Ⅲ communication specification
Type of Connection Cascade connection/Star connection/Point to Point connection
Transmission cable
MECHATROLINK-
Ⅲ
dedicated cable (CAT5e STP)
To connect the NETC01-M3 , the dedicated cable with
connector is recommended.
Connector Industrial mini I/O connector (Tyco Electronics AMP)
Transmission distance 6300 m (20669.3 ft.) maximum
Distance between stations 100 m (328.1 ft.) maximum, 200 mm (7.87 in.) minimum
Baud rate 100 Mbps
Transmission method 4B/5B MULT-3
Access control method Master - Slave
Electrical insulation between
devices and transmission lines
Transformer
Number of stations connected Up to 62 stations
Station address 03h to EFh (Factory setting: 61h)
Communication mode Cyclic communication mode (Asynchronous command)
Transmission cycle 0.5/1.0/1.5/2.0/2.5/3.0/3.5/4.0/8.0 ms
Data size 16/32/48/64 (Factory setting: 32 bytes)
Implemented commands Standard I/O profile command