Safety precautions
−3−
1 Safety precautions
The precautions described below are intended to prevent danger or injury to the user and other
personnel through safe, correct use of the product. Use the product only after carefully reading and fully
understanding these instructions.
Handling the product without observing the instructions that
accompany a "Warning" symbol may result in serious injury or
death.
General
•
Do not use the product in explosive or corrosive
environments, in the presence of flammable gases, locations
subjected to splashing water, or near combustibles. Doing so
may result in fire or injury.
•
Assign qualified personnel the task of installing, wiring,
operating/controlling, inspecting and troubleshooting the
product. Failure to do so may result in fire, injury or damage
to equipment.
Connection
•
Keep the power supply input voltage of the
NETC01-M3
within the specified range. Failure to do so may result in fire.
•
For the power supply of the
NETC01-M3
, use a DC
power supply with reinforced insulation on its primary and
secondary sides. Failure to do so may cause electric shock.
•
Connect the cables securely according to the wiring diagram.
Failure to do so may result in fire.
•
Do not forcibly bend, pull or pinch the cable. Doing so may
cause fire. Applying stress to the connection area of the
connectors may cause damage to the product.
Operation
•
Turn off the
NETC01-M3
power in the event of a power
failure. Or the motor may suddenly start when the power is
restored and may cause injury or damage to equipment.
•
When an alarm of the
NETC01-M3
is generated, stop the
motor. Failure to do so may result in fire, injury or damage to
equipment.
Repair, disassembly and modification
•
Do not disassemble or modify the
NETC01-M3
. Doing
so may cause injury. Refer all such internal inspections
and repairs to the branch or sales office from which you
purchased the product.
Handling the product without observing the instructions that
accompany a "Caution" symbol may result in injury or property
damage.
General
•
Do not use the
NETC01-M3
beyond its specifications. Doing
so may result in injury or damage to equipment.
•
Keep your fingers and objects out of the openings in the
NETC01-M3
. Failure to do so may result in fire or injury.
Installation
•
Install the
NETC01-M3
in the enclosure in order to prevent
injury.
•
Keep the area around the
NETC01-M3
free of combustible
materials in order to prevent fire or a skin burn(s).
•
Do not leave anything around the
NETC01-M3
that would
obstruct ventilation. Doing so may result in damage to
equipment.
Connection
•
The power supply connector (CN1), MECHATROLINK-
Ⅲ
communication connector (CN2), data edit connector
(CN3) and RS-485 communication connector (CN6) of the
NETC01-M3
are not electrically insulated. When grounding
the positive terminal of the power supply, do not connect any
equipment (PC, etc.) whose negative terminal is grounded.
Doing so may cause the
NETC01-M3
and these equipment
to short, damaging both.
Operation
•
Use the
NETC01-M3
in combination with the designated
applicable product. Failure to do so may result in fire.
•
When operating the product, do so after making preparations
that an emergency stop can be performed at any time.
Failure to do may result in injury.
•
Set a suitable operation speed and acceleration/deceleration
rate. Improper setting may cause loss of the motor
synchronism and moving the load to an unexpected direction,
which may result in injury or damage to equipment.
•
Immediately when trouble has occurred, stop running and
turn off the
NETC01-M3
power. Failure to do so may result
in fire or injury.
•
Always use an insulated screwdriver to adjust the switches
of the
NETC01-M3
.
Disposal
•
To dispose of the
NETC01-M3
, disassemble it into parts and
components as much as possible and dispose of individual
parts/components as industrial waste. Contact your nearest
Oriental Motor office if you have any questions.
Содержание NETC01-M3
Страница 61: ...61...
