Oriental motor NETC01-M3, Руководство пользователя

Страница: 57 / 62

Operation using the OP X - 2 A
−57−
• Present alarm
When an alarm generates, a corresponding alarm code will be displayed.
Also, alarm records can be checked and cleared.
Alarm code list
No. of ALARM
LED blinks
Alarm
code
Alarm type
9 A1h EEPROM error
7
E3h Communication switch setting error
E4h RS-485 communication error
E6h Network connection product error
Note • Do not turn off the
NETC01-M3
power while alarm records are being cleared (=while the display is
blinking). Doing so may damage the data.
• If an alarm generates, communication between the NETC01-M3 and RS-485 communication
compatible product is stopped. The remote I/O, parameter command, maintenance command and
monitor command of the RS-485 communication compatible product cannot be used.
• To reset the alarms, cycle the
NETC01-M3
power.
• Present warning
When a warning generates, a corresponding warning code will be displayed. Warning records can be
checked and cleared.
Warning code list
Warning code Warning type
E4h RS-485 communication error
E5h RS-485 communication timeout
Note • Do not turn off the NETC01-M3 power while a warning records are being cleared (=while the display
is blinking). Doing so may damage the data.
• Warning records can be cleared automatically by turning off the NETC01-M3 power.
13.8 Parameter mode
When a parameter has been changed, the new parameter will become effective after the NETC01-M3
power is cycled.
„
Application parameter
Parameter name Description Setting range Initial value
OPX-2A
screen
display
Data setter edit
Sets whether it is possible to edit using
the
OPX-2A
.
0: Disable
1: Enable
1: Enable −
∗
* It can be changed by setting/canceling the edit lock function on the
OPX-2A
.