Orbitalum MOBILE WELDER OC PLUS Скачать руководство пользователя

Страница: 31 / 204

MOBILE WELDER OC PLUS

ENGLISH

ORBITALUM TOOLS GmbH

, D-78224 Singen www.orbitalum.com

Setup and commissioning

CAUTION

General danger

► In case of danger, unplug the mains plug!

► Accessibility to the mains plug must always be assured in order to

permit disconnecting the power supply from the mains.

CAUTION

Danger from incorrect operating sequence

► Observe the operator's obligations.

► Operation only by suitable, instructed personnel.

WARNING

Danger of burns and fire from arcs!

Tripping over the hose assembly can cause the welding current plugs to
be pulled out of the welding power supply and cause an arc.

► Lay the lines and cables so that they are

not

under tension.

► Ensure that lines and cables do not pose a trip hazard.

► Attach the strain relief.

► Mechanically secure hose assembly connection.

► Do not work near highly flammable substances.

7.1

Unpacking the power supply

Remove the cardboard cover insert from the cardboard carton.

Remove the cardboard protective corners (4 x) from the cardboard carton.

Lift the power supply out of the cardboard carton by the handle with both hands and place it upright
on a flat, stable and non-slip surface.

Check the power supply and accessories for transport damage.

CAUTION

Danger of injury from the high weight of the orbital welding

power supply! Depending on the model, the orbital welding power
supply weighs max. 23.20 kg (51.15 lbs).

► To unpack, place the shipping carton upright on a stable, level, non-

slip and non-combustible surface.

► Wear safety shoes to EN ISO 20345, Class SB.

► When lifting the machine do not exceed the permissible total weight

of 25 kg for men and 15 kg for women.

Содержание MOBILE WELDER OC PLUS













































































































































































































Результаты поиска

Содержание MOBILE WELDER OC PLUS

Отзывы:

Похожие инструкции для MOBILE WELDER OC PLUS

Бренды по названию

Популярные бренды

Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Результаты поиска

Содержание MOBILE WELDER OC PLUS

Отзывы:

Похожие инструкции для MOBILE WELDER OC PLUS

Бренды по названию

Популярные бренды