Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Страница: 144 / 204

ENGLISH MOBILE WELDER OC PLUS
144
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
8.1.6.5 Service
8.1.6.5.1 Coolant pump On
The "Coolant pump On" function is used to empty the coolant tank, e.g. for service purposes such as
coolant change or if the power supply will not be used for an extended period of time.
Prerequisite: Cooling unit ORBICOOL MW is connected.
8.1.6.5.2 Motor calibration
Use to check and correct the rotor speed.
For how to use, see the chapter Motor calibration [ } 167]
8.1.6.5.3 Importing procedures
The "Import Programs" function can be used to import welding procedures from power supplies of
the ORBIMAT C and ORBIMAT CB generations and convert them into the current welding procedure
format.
NOTICE Welding procedures for the ORBIMAT CA generation are fully com-
patible and do not have to be imported. They can be copied/
opened directly via the "Program Manager".
Preparation
1. On a compatible USB stick with the help of a PC, create the "PROGRAMS" folder.
NOTICE The "PROGRAMS" folder must be located at the top level in the
root directory of the USB stick.
2. Copy the welding procedures to be imported without subfolders into the "PROGRAMS" folder cre-
ated.
Procedure
1. Insert the USB stick into any USB port of the power supply.
2. Select the "Import Programs" button
ð
If the import is successful, a message "Import of programs is finished" appears
3. Confirm with "OK".
4. Restart the power supply.
ð
The imported programs can be used in the "Program Manager" in the "Import_XXX" folder.