Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Страница: 7 / 204

MOBILE WELDER OC PLUS ENGLISH
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
7
2 Information and safety instructions for the owner
2.1 Requirements for the owner-operator
Workshop/outdoor/field use: The owner is responsible for safety in the danger zone around the ma-
chine, and should allow only qualified personnel to enter the zone or operate the machine in the danger
zone.
Employee safety: The operator has to observe the safety regulations described in this chapter as well
as has to work safety-consciously and with all prescribed safety equipment.
The employer undertakes to give the employees clear notice of the dangers arising that are specified in
the EMF directives and to evaluate the workplace correspondingly.
Requirements for special EMF evaluations with regard to general activities, working materials
and workplaces*:
TYPE OF WORKPLACE
OR WORK EQUIP-
MENT
EVALUATION REQUIRED FOR:
Employees without
particular risk
Employees at particu-
lar risk
(with the exception of
those
with active implants)
Employees with active
implants
(1) (2) (3)
Arc welding, manual (in-
cluding MIG (Metal Inert
Gas), MAG (Metal Active
Gas), TIG (Tungsten In-
ert Gas)) under obser-
vance of tried-and-tested
procedures and without
physical contact to the
line No No Yes
* To Directive 2013/35/EU