Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Страница: 106 / 204

ENGLISH MOBILE WELDER OC PLUS
106
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
8.1.4.2.5 Level
All welding procedure parameters for the individual levels are located in the "Level" section of the weld-
ing procedure. A welding procedure can consist of several levels. By using multiple levels, physical con-
ditions such as the effect of gravity in different welding positions can be addressed individually.
36
37
38
39
40
41
42
Illustration: "Level" section of the welding procedure
NO. PARAMETER FUNCTION
36 "HP Current" High pulse welding current, primary welding current in amps.
37 "LP Current" Low-pulse welding current, secondary welding current in amps.
38 "HP Time" High-pulse travel time: Time period in seconds during which the HP current
flows.
39 "LP Time" Low-pulse time: Time period in seconds during which the LP current flows.
40 "HP Travel
Speed" High pulse travel speed: Welding speed in mm/min (in/min) used during the
time period of high-pulse current.
41 "LP Travel Speed" Low-pulse travel speed: Welding speed in mm/min (in/min) used during the
time period of low-pulse current.
42 "Level Slope" Duration of linear welding current adjustment between the current value of
the current level and that of the following level.
The value is the percentage of the level time of the following level in which
the linear transition from the (current) value of the previous level to the cur-
rent value of the current level occurs.