Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Страница: 95 / 204

MOBILE WELDER OC PLUS ENGLISH
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
95
NO. PARAMETER FUNCTION
6 "Rotor Start
Position"
Enter in °. Determines the start position of the welding process, starting
from the home position of the weld head. After the welding process is
started, the electrode moves from the home position to the entered posi-
tion. Ignition takes place when this position is reached.
NOTICE! When the electrode or the weld head rotor is moved from the
home position, there is a risk of misfiring between the rotor and sur-
rounding components due to the open position of the weld head ro-
tor. When using this function, make sure that the electrode is in good
condition, the electrode gap is correct and the contact surfaces
(clamping shells and ground connections) and workpiece surfaces are
clean!
7 "Replace Elec-
trode Alert"
When this function is activated, you can define the number of welding igni-
tions after which the operator is prompted via a message window to check
or change the electrode.
Ignitions until
electrode replace-
ment necessary
Input field for the number of ignitions after which a message window ap-
pears prompting the operator to replace the electrode.
After each ignition the value decreases by 1. When the value "0" is
reached, the prompt window appears.
8 "Scale Weld" By entering a correction factor in %, the HP and LP welding currents pro-
grammed for the individual level segments can be changed across seg-
ments. It is recommended that you use this function if the welding current is
not to be adjusted segment-specifically but across segments.
NOTICE! The HP and LP welding current values changed by the correc-
tion factor are applied after the welding procedure is saved. The new
welding current values now serve as the new calculation basis for the
correction factor. Therefore, the factor is displayed with the value 0%
after saving.