Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Страница: 98 / 204

ENGLISH MOBILE WELDER OC PLUS
98
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
NO. PARAMETER FUNCTION
12 "Printer Selec-
tion"
Internal
System printer installed in the welding power supply.
USB
External USB printer
Prerequisite:
Printer is connected to any USB port.
NOTICE! Due to the variety of USB printers available on the market, no
general compatibility can be guaranteed.
NET
Network printer
Prerequisite:
Power supply is incorporated in the network. See the chapter "Network En-
vironment”.
The printers shared on the network are listed in the dropdown list.
"Update Printer
List"
Selecting this option will update the printer list in the background.
When you open the dropdown list again, any new entries that may have
been added are displayed.
13 "Log Complete
Welds"
When activated, weld data logs are only created when the welding process
is completely finished. No logs are created in the event of a manual abort.
This function can be helpful when using the weld head to set tack points by
manually moving the electrode position and briefly starting and stopping the
welding process.
14 "Direction of
Rotation"
Dropdown list selection for selecting the desired direction of rotation of the
weld head.
clockwise
Standard direction of rotation: Starts welding upslope
counterclockwise
Alternative direction of rotation: Starts welding downslope
15 "Tacking" When this function is activated, tack points are set on the basis of the pro-
grammed tacking parameters after the gas pre-purge time has elapsed.
This function can be useful to fix the alignment of the tubes to be welded
before the actual welding process by partial welding of the workpiece sur-
face. Useful, for example, for materials that tend to warp when exposed to
heat.