Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Страница: 109 / 204

MOBILE WELDER OC PLUS ENGLISH
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
109
NO. PARAMETER FUNCTION
50 "Flow Force
Time" – Post-
Purge
Time period in seconds during which the weld head is pressurized with the
set Flow Force gas quantity.
NOTICE! It is recommended that you keep the process gas flow applied
for 3 seconds after the welding arc has been extinguished and then
switch to the Flow Force gas quantity.
51 "Coolant De-
lay"
Time period in minutes during which the coolant system is to remain acti-
vated after the end of the welding process.
This function can be used to actively cool the weld heads with the liquid
cooling system of the power supply after completion of the welding
process.
NOTICE! When the coolant system is active, the weld head should not
be disconnected from the power supply.
NOTICE! This function must be activated in the "System Settings" be-
forehand:
► Set switch at "Coolant Delay" to "ON".
See the chapter System adjustments [
}
123]