Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Страница: 84 / 204

ENGLISH MOBILE WELDER OC PLUS
84
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
NO. DESIGNATION FUNCTION
3 Folder level All welding protocol folders created in the parent location are dis-
played at this level. The folder structure is taken from the Program
Manager of the associated welding procedure.
4 Menu cursor Drives, folders or welding procedures marked with the menu cursor
are highlighted in blue in the Program Manager.
5 Weld data log level Shows the name of the welding procedure associated with the weld
data logs.
All weld data logs located in the folder are listed at this level.
Each weld data log has a unique number generated when the data
record is saved (at the end of the current welding process), which is
comprised of the current date and time.
Example:
Log file 20210302 103517 (3/2/2021 at 10:35 a.m.
and 17 seconds)
6 Weld data log status
icon The status icon indicates whether, during the welding recorded in the
associated log, a warning message or an abort occurred or whether
the weld was performed without these.
SYMBOL MEANING
Check mark: All measured actual values lie within the monitoring lim-
its for alarm and abort.
Exclamation mark: An alarm message was generated during welding.
The alarm limits set in the monitoring limits were violated. The
process was not aborted.
X Welding was aborted. The monitoring limits were overshot/under-
shot or the operator initiated a "STOP".
7 "Manage" softkey The "Manage" softkey opens a softkey submenu which can be used
to delete, copy, move and print welding protocols.
For further information, see the chapter Managing welding proce-
dures [
}
74]
8 "Display" softkey The "Display" softkey opens the welding protocol currently marked
with the menu cursor and displays it in full screen mode.
The full screen display can be closed by pressing the "Close" softkey.
9 "Print" softkey The "Print" softkey is used to print out the welding protocol currently
marked with the menu cursor using the printer set in the system set-
tings.
For further information, see the chapter System adjustments [ } 123]