Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Страница: 99 / 204

MOBILE WELDER OC PLUS ENGLISH
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
99
NO. PARAMETER FUNCTION
16 "Directly Weld
After Tacking"
When this function is activated, the electrode moves to the programmed
start position after setting the last tack point; the actual welding process
starts immediately upon reaching it.
If this function is deactivated, only the tacking parameters of the welding
procedure are taken into account.
After the last tack point is set and after the gas post-purge time has
elapsed, the process is terminated.
This function is useful if the workpiece only needs to be tacked.
17 "Tack Points" Enter the desired number of tack points. At least 2, at most 8.
18 "Tack Current" Welding current flowing during the tack time in amperes.
19 "Pilot Current" Pilot current to maintain the arc between the tack points.
NOTICE! This function is used to maintain the arc when moving the
electrode between the tack point positions so as not to have to re-ig-
nite at each tack point location. Therefore, the pilot current value
should be selected as low as possible so that the workpiece surface is
not changed by the pilot current.
20 "Tack Time" Duration of the tack current in seconds.
21 "Comment" Free text field for additional information about the welding procedure.