Orbitalum MOBILE WELDER OC PLUS, Руководство по эксплуатации

Страница: 128 / 204

ENGLISH MOBILE WELDER OC PLUS
128
ORBITALUM TOOLS GmbH , D-78224 Singen www.orbitalum.com
NO. DESIGNATION SYSTEM ADJUSTMENTS OPTIONS
9 "Extend
Coolant Pump
Time"
NOTICE! To use
this function, a
cooling unit
must be con-
nected.
The "Coolant Delay" function can be used to activate the liquid cooling sys-
tem of the power supply beyond the welding process.
On activation of the function, the "Coolant Delay" input field is also activated
in the welding procedure at the "Gas Post-Purge" program level.
Based on the program, a time in min. can be set there for which the liquid
cooling system remains active after the end of the welding process.
Coolant Delay ON: The "Coolant Delay" program input field is ac-
tivated.
Coolant Delay OFF: The "Coolant Delay" program input field is de-
activated.
NOTICE! Do not disconnect the weld head from the power supply when
a liquid cooling system is active.
10 "Permanent
Gas Quantity"
The "Permanent Gas Quantity" input field can be used to set the gas volume
flow in l/min that flows into the weld head when the "Gas Permanently On"
function is activated.
Recommended "Permanent Gas Quantity": 2-5 l/min
See also the chapter Gas overview [ } 156]
11 Touchscreen ON/
OFF Activates/deactivates the touch function of the touchscreen.