Opticon MDI-4000 Series, Руководство по последовательному интерфейсу, Страница: 60 / 139

MDI-4000 Series Serial Interface Manual
48
*1
For MEK-3100 circuit configuration, 40 ms or more is required.
Figure 29: Power-Off Timing
When saving scan engine configurations, settings are stored in the scan engine:
•
when the Z2 command is sent.
•
after 1D or 2D menu barcodes are processed.
Writing these settings to flash memory can take up to 10 seconds. Make sure the power is not
turned off during this period, or the settings may be corrupted.
Note: When the Z2 command is sent, i
f “ACK/NAK for serial command” is enabled, the scan
engine sends an ACK after saving the configuration data.
5.6 Read Timing
This diagram illustrates the read timing of the scan engine.
Figure 30: Read Timing
Data
“Z”
Command
t
2
t
1
BUZZERn
GR _ LEDn
TxD
TRIGn
RxD
or
USB +
Scan
Imaging and Decoding