Opticon MDI-4000 Series Скачать руководство пользователя страница 41

Страница: 41 / 139

MDI-4000 Series Serial Interface Manual

4.2.3

USB-COM Basic Information

These are the basic USB-COM settings.

USB-COM Settings

Setting

Description

Notes

Transfer Speed

Full Speed USB 2.0 (FS mode)

Required power
supply capability

500 mA

Actual current value is
different.

Vendor ID

065A

Product ID

A002

Suspend mode

Default: Valid

Remote wakeup

Used when the host system is using suspend.

Fixed COM number You can assign a fixed COM number.

Default: not fixed

4.2.4

Integration (USB Driver)

To connect to the PC through the USB-COM interface, you need to download and install a USB
driver. If you are running Microsoft

Windows

, the driver is automatically downloaded when the

host connects to the Internet. If you are running Linux, the driver should already be installed.

Download the USB Driver

1. Go to the Downloads page on the Opticon website at:

https://opticon.com/downloads/

2.  Scroll down until you see the Software column on the right.
3.  Continue to scroll until you see USB Drivers in the Software column.
4.  Click

USB Drivers

. The USB Drivers Installer is downloaded.

5. Open the USB Drivers Installer application and follow the instructions.

4.2.5

Connection Confirmation (USB-COM)

Before you can use the USB-COM interface, you need to confirm the connection (Windows 10).

Install the Driver and Confirm the USB-COM Connection

1. Connect the scan engine to the PC.
2. Right-click the Microsoft Windows icon and select

Device Manager

Содержание MDI-4000 Series












































































































































Результаты поиска

Содержание MDI-4000 Series

Отзывы:

Opticon MDI-4000 Series, Руководство по последовательному интерфейсу, Страница: 41 / 139

Результаты поиска

Содержание MDI-4000 Series

Отзывы: