Opticon MDI-4000 Series, Руководство по последовательному интерфейсу, Страница: 19 / 139

MDI-4000 Series Serial Interface Manual
7
Input examples:
1-digit command <ESC>
Δ<CR>
2-digit command <ESC>
ΔΔ<CR>
3-digit command <ESC>[
ΔΔΔ<CR>
Two 4-digit commands <ESC>
ΔΔΔΔ<CR>
2-digit and 3-digit command <ESC>
ΔΔ[ΔΔΔ<CR>
You can send the command through
Opticon’s “UniversalConfig.” For help, contact your Opticon
Sales Representative.
Note: In UniversalConfig, <ESC> is automatically sent.
Figure 5:
Opticon’s “Universal Config”
3.1.2 Sending Command Packets
The maximum length of a command packet is 1000 characters. If more than 1000 characters
are sent, the scan engine may lose some characters and the command packet may not be
processed correctly.
If you send a packet that contains 32 or more characters and the baud rate is set to 460800 or
921600, the scan engine may miss part of the command. To use these baud rates, split up
commands into packets that contain less than 32 characters.