Opticon MDI-4000 Series Скачать руководство пользователя страница 15

Страница: 15 / 139

MDI-4000 Series Serial Interface Manual

About the MDI-4000 Series Scan Engines

Before configuring or using the MDI-4000 Series scan engines, make sure that you are familiar
with their physical details and specifications.

2.1

Model Details

The scan engine model is a combination of the model name, focus, and interface.

Scan Engine Model Details

Model Name

Focus

Interface

MDI-4150

SR, HD, UD

B, DC, D

MDI-4050

SR, HD, UD

B, DC, D

MDI-4100

SR, HD, UD

B, DC, D

MDI-4000

SR, HD, UD

B, DC, D

Focus Description

Focus

Description

Standard Range (115 mm)

High-Density (65 mm)

Ultra High-Density (45 mm)

Interface Description

Interface

Description

UART

USB-COM

USB-HID

Default factory setting.

2.1.1

Standard Product Description

The standard scan engine models have these configurations. Additional configurations are
available by special order. For help, contact your Opticon Sales Representative.

The standard scan engine model configuration is a scan engine with an integrated decoder
board, Standard Range focus, and a UART interface:

•

MDI-4150 SRB

•

MDI-4050 SRB

•

MDI-4100 SRB

•

MDI-4000 SRB

Содержание MDI-4000 Series












































































































































Результаты поиска

Содержание MDI-4000 Series

Отзывы:

Opticon MDI-4000 Series, Руководство по последовательному интерфейсу, Страница: 15 / 139

Результаты поиска

Содержание MDI-4000 Series

Отзывы: