Opticon MDI-4000 Series Скачать руководство пользователя страница 24

Страница: 24 / 139

MDI-4000 Series Serial Interface Manual

Example Custom Command Line Settings

Setting

Command

Enable Fast Boot Mode.

[EFXQ1

Enable

ACK/NAK.

Disable

2D Menu Barcode.

[D1Z

Enable

Upside Down Image.

[EFV[E8I

Set Baud Rate to 115200 bps.

Enable Low Power Standby.

[EB8

Set Low Power Standby Transition Time to 2 seconds.

[EBAQ0Q0Q0Q2

Reboot the scan engine.

Initialize the scan engine.

Example packets sent to configure Custom Command Line Settings:

You can also output currently configured commands in Custom Command Line Settings.

Output Commands

Command

Description

[EFZ

Output configured commands in custom command line

Example output:

[EFXQ1WC[D1Z[EFU[E8ISZ[EB8[EBAQ0Q0Q0Q2

Note:

If no Custom Command Line commands have been configured, the scan engine will not

send anything.

3.4

Fast Boot Mode

Fast Boot Mode reduces the time from power-on to ready. When this mode is used, all settings
saved with the Z2 command are ignored and the scan engine starts with the default settings.
For more information, see

“Factory Default Settings” on page 10

You can change the default settings with Custom Command Line commands. For more
information, see

“How to Permanently Change the Factory Default Settings” on page 11

Fast Boot Mode Enable/Disable

Command

Description

Default

[EFX

Get the current mode (*)

Disable Fast Boot Mode

✓

Enable Fast Boot Mode

The return values are: Disable Fast Boot Mode<CR>, Enable Fast Boot Mode<CR>.

Содержание MDI-4000 Series












































































































































Результаты поиска

Содержание MDI-4000 Series

Отзывы:

Opticon MDI-4000 Series, Руководство по последовательному интерфейсу, Страница: 24 / 139

Результаты поиска

Содержание MDI-4000 Series

Отзывы: