Omron V530-R150E-3 -, Руководство по эксплуатации

Страница: 94 / 300

77
Trigger Inputs and Output Format
Section 4-3
Write Scene Data (@CW) 1:1 Connection
Writes the settings data for the scene that is currently being dis-
played. To write the settings data for another scene, first change the
screen number with the Change Scene Number command and then
execute this command.
“
page 64
Model settings cannot be made for scenes set to QR Code (Pattern)
or Data Matrix (Pattern). Register a special model.
Refer to the table on the indicated page for details on each mode’s
settings data.
Send The required settings data depends on the mode.
Changing QR Code (Normal)
Changing QR Code (Pattern)
Changing Data Matrix (Normal)
Changing Data Matrix (Pattern)
Receive “OK” indicates that the command was executed correctly:
“ER” indicates that the command was not executed correctly:
Settings
Q N (1) (2) ----- (15) (16) <Footer> <FCS> C W @
(See table on page 72.)
Settings data
Q P (1) (2) ----- (17) (18) <Footer> <FCS> C W @
(See table on page 73.)
Settings data
D N (1) (2) ----- (19) (20) <Footer> <FCS> C W @
(See table on page 74.)
Settings data
D P (1) (2) ----- (16) (17) <Footer> <FCS> C W @
(See table on page 76.)
O K <Footer> <Header>
E R <Footer> <Header>