Omron V530-R150E-3 -, Руководство по эксплуатации

Страница: 196 / 300

179
SET (Setting) Mode
Section 6-1
trast ranges from 0.00 to 1.00, with higher values indicating high-
er contrast and lower values indicating lower contrast.
Note Analysis is not performed on through images.
Procedure
1,2,3...
1. Select 2. Image Analysis.
2. Select Contrast (Line Bright).
3. Set the gray edge level for black and white judgment (1 to 255)
and select Register.
Press the ENT Key to move the cursor so that the gray edge value
can be input. Use the Left/Right Keys to move between digits and
use the Up/Down Keys to change the value of the digits.
The Line Bright window will be displayed after the gray edge value
is registered.
4. Move the cross cursor with the Up/Down/Left/Right Keys and
press the ENT Key when the cursor is at the desired starting point
of the line. Press the SHIFT Key together with the above keys to
move the cursor faster.
5. Select the desired end point of the line.
The average density of white cells, average density of black cells,
and contrast will be displayed.