Omron V530-R150E-3 -, Руководство по эксплуатации

Страница: 85 / 300

68
Trigger Inputs and Output Format
Section 4-3
Read Version Information (@VR) 1:1 Connection
Reads the system’s version information.
Send
Receive The version information is returned if the command was executed
correctly:
Example version information:
V530-R150 Ver3.00 2001/04/01 12:00
Read System Data (@SR) 1:1 Connection
Reads the specified system data.
Send
Set the parameter number (1 to 34) to read the corresponding system
data.
Receive The system data is returned if the command was executed correctly:
The following table shows the data that is read for each parameter
number.
@ V R <Footer>
<Version> <Footer> <Header> <FCS>
@ S <Footer> R <Parameter number>
<System data> <Footer> <Header> <FCS>
Number System data
1 RS-232C Baud rate 0: 2,400, 1: 4,800, 2: 9,600, 3: 19,200,
4: 38,400 (bps)
2 Data length 0: 7 bits, 1: 8 bits
3 Parity 0: None, 1: Odd, 2: Even
4 Stop bits 0: 1 bit, 1: 2 bits
5 Header 0: None, 1: STX, 2: ESC
6 Footer 0: CR, 1: LF, 2: CR+LF, 3: ETX
7 FCS 0: OFF, 1: ON
8 Mode 0: Normal, 1: Host Link, 2: 3964, 3: 3964R
9 Normal
(No-protocol) Flow control 0: None, 1: RS/CS, 2: Xon/Xoff
10 Timeout 001 to 120 s (See note 1.)