background image

161

SET (Setting) Mode

Section 6-1

The reading conditions can be set manually. If parameters have been
set using the teaching function, those parameters can be viewed or
changed, if necessary, from this menu.

1,2,3...

1.

Select the color of symbol.

2.

Select whether Right & Left Reverse of QR Codes is necessary.

3.

Select the gray edge value (i.e., the ratio of black and white) used
to detect finder patterns. (Setting range: 1 to 127; default setting:
32.)
If the ratio of the intensity of black and white is large, set to a large
value, and if the ratio of the intensity of black and white is small,
set it to a small value.
This setting can be made using the teaching function (which au-
tomatically measures the optimum value), so whenever resetting
the reading conditions, always use this function first. 

“

 page 158

1. Read QR (Normal)

Reading Settings (Manual)

*:   Indicates items set automatically using the teaching function.

*
*

Black 
(Default 
setting)

White

ON

For reading an image after reflection, or through the back 
of a transparent material, such as glass.

OFF 
(Default 
setting)

For normal reading (from the front of the object)

Auto

Automatically judges whether left/right reversal is required. 
Use this setting when the codes are mixed with some 
reversed and some not reversed. The processing time is 
longer than the time required with the ON or OFF setting.

Black symbol printed on white base.

White symbol printed on black 
base.

Содержание V530-R150E-3 -













































































































































































































































































































Отзывы: