Omron Sysmac CP1H, Руководство по эксплуатации

Страница: 169 / 810

135
CP-series Expansion I/O Unit Wiring Section 3-6
I/O Wiring Precautions To enable using the analog I/O under optimal conditions, be careful of the fol-
lowing points for noise reduction.
• Use 2-conductor shielded twisted-pair cable for the I/O wiring, and do not
connect the shield.
• Wire I/O lines apart from power lines (AC power supply lines, three-phase
power lines, etc.), and do not place them in the same duct.
• If noise is received from power supply lines (e.g., when sharing a power
supply with electric welding machines or electric charging devices, or
when near a high-frequency source), insert a noise filter in the power sup-
ply input section.
3-6 CP-series Expansion I/O Unit Wiring
CP-series Expansion I/O Units
For details on wiring Expansion Units, such as Analog I/O Units, Temperature
Sensor Units, CompoBus I/O Link Units, and DeviceNet I/O Link Units, refer to
SECTION 7 Using CP-series Expansion Units and Expansion I/O Units .
Model Inputs Outputs
40-point I/O
Units CP1W-40EDR 24 24-VDC
inputs 16 relay outputs
CP1W-40EDT 16 transistor outputs (sinking)
CP1W-40EDT1 16 transistor outputs (sourcing)
32-point
Output Units CP1W-32ER None 32 relay outputs
CP1W-32ET 32 transistor outputs (sinking)
CP1W-32ET1 32 transistor outputs (sourcing)
20-point I/O
Units CP1W-20EDR1 12 24-VDC
inputs 8 relay outputs
CP1W-20EDT 8 transistor outputs (sinking)
CP1W-20EDT1 8 transistor outputs (sourcing)
16-point
Output Units CP1W-16ER None 16 relay outputs
CP1W-16ET 16 transistor outputs (sinking)
CP1W-16ET1 16 transistor outputs (sourcing)
8-point Input
Units CP1W-8ED 8 24-VDC
inputs None
8-point Out-
put Units CP1W-8ER None 8 relay outputs
CP1W-8ET 8 transistor outputs (sinking)
CP1W-8ET1 8 transistor outputs (sourcing)